| |
|
RenShape® Machining
Notes:
View
the print-friendly version (pdf)
Note: All product
titles link to the respective product pages
|
Roughing
Speed
(RPM) |
Roughing
Feed
(IPM) |
Finishing
Speed
(RPM) |
Finishing
Feed
(IPM) |
| RenShape Modeling &
Styling Boards |
| RenShape
5020 |
2,500 |
200 |
15,000 |
200 |
| RenShape
5025 |
2,500 |
200 |
15,000 |
200 |
| RenShape
5030 |
2,500 |
200 |
15,000 |
200 |
| RenShape
5045 |
2,500 |
100 |
15,000 |
200 |
| RenShape
440 |
2,000 |
200 |
15,000 |
200 |
| RenShape
5440 |
2,000 |
100 |
15,000 |
200 |
| RenShape
450 |
2,000 |
100 |
15,000 |
200 |
| RenShape
5460 |
2,000 |
100 |
15,000 |
200 |
| RenShape
460 |
1,600 |
40 |
10,000 |
100 |
| RenShape
5003 (Epoxy) |
1,600 |
40 |
10,000 |
100 |
| RenShape Tooling &
High-Temperature Work Boards |
| RenShape
470 |
1,600 |
40 |
10,000 |
100 |
| RenShape
472 |
1,600 |
40 |
10,000 |
100 |
| RenShape
473 |
1,600 |
40 |
10,000 |
100 |
| RenShape 474 |
1,600 |
40 |
10,000 |
100 |
| RenShape
550 |
1,600 |
40 |
10,000 |
100 |
| RenShape
5166 |
1,600 |
40 |
10,000 |
100 |
| RenShape
5169 |
1,600 |
70-140 |
10,000 |
100-200 |
| RenShape 5179 |
1,500 |
60 |
10,000 |
100 |
| RenShape
5008 (Epoxy) |
1,600 |
40 |
10,000 |
100 |
| RenShape
2000 (Epoxy) |
6-10,000 |
240+ |
15,000 |
300+ |
| Cutters
Used: |
Roughing – 1” Ball
End mill, 4-Flute, Carbide
Finishing – 5/8” Ball
End Mill, 2-Flute Carbide
|
| Depth: |
Roughing – varied
from 1/4” to 2-1/2” deep with a 40% stepover
Finishing – 1/8” deep
leaving 0.002” scallop height
|
| These
machining parameters are represented as starting points.
Cutter type and material, spindle speed, feed rate, machine
power and rigidity all affect machining results. User must
determine best parameters for specific applications. |
Tips:
- To saw dense boards (over 0.8g/cc) use a saw with offset
carbide teeth to reduce binding
- Eliminate dust by lowering spindle speed and increasing feed
rate
- Eliminate burning with sharp cutters and lower spindle speeds.
- Clear chips to prevent cutter heat build-up. |
| |
| ©2001-2006
Freeman Mfg. & Supply Co. |
| Please
read our disclaimer |
|
